|
Post by newenglander on Jan 24, 2015 10:40:54 GMT -5
Looking for a sleeve adapter to go from a 4" Schelde to 3.5" Sports Imports... a quick look in the internet finds a lot of 3.5 to 3. Anyone know of a source for these?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 24, 2015 10:59:58 GMT -5
We used pvc that we had cut at Home Depot
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 24, 2015 11:10:52 GMT -5
Much easier -- and beneficial -- to just lengthen your players arms.
|
|
|
Post by rogero1 on Jan 24, 2015 21:33:02 GMT -5
Looking for a sleeve adapter to go from a 4" Schelde to 3.5" Sports Imports... a quick look in the internet finds a lot of 3.5 to 3. Anyone know of a source for these? Another item to check is the hole depth. If the hole is dug deeper than what is needed for a Sports Imports standard, then you can contact Sports Imports for a spacer to put into the hole. We had all four courts adjusted this way and the net heights came out perfect for every one.
|
|
|
Post by vbnerd on Jan 25, 2015 9:10:31 GMT -5
Call Sports Imports - they came out and took the measurements and fabricated the adapters. They came in the mail with our new equipment.
|
|
|
Post by Wiswell on Jan 25, 2015 17:00:57 GMT -5
I read the title and I thought - just hem it??
|
|
|
Post by mikegarrison on Jan 25, 2015 18:45:47 GMT -5
I read the title and I thought - just hem it?? Yeah, me too.
|
|
|
Post by brunie on Jan 25, 2015 19:42:38 GMT -5
I read the title and I thought - just hem it?? Yeah, me too. Me three.
|
|
|
Post by newenglander on Jan 25, 2015 22:07:09 GMT -5
Thanks... I'll look at the PVC option. I didn't think to see if I can get some that's 4" outside diameter and 3.5" inside diameter. I'm buying a used system so I'm not sure if SI will do it for me...
|
|
|
Post by mikegarrison on Jan 25, 2015 22:09:56 GMT -5
Thanks... I'll look at the PVC option. I didn't think to see if I can get some that's 4" outside diameter and 3.5" inside diameter. I'm buying a used system so I'm not sure if SI will do it for me... I bet that if you pay them enough money they will be happy to do it. However, it does seem like anybody with a machine shop could probably fab something up for you.
|
|